An ISO 9001:2015 Company
+91-80-23484179 | | Mon - Sat 08:00 - 20:00

K-WTDB-60 – Disc Brakes

Max Braking force :24956 N
Min braking force : 20962 N
Max clamping force : 31,196 N
Min clamping force : 26,202 N
Operating pressure normal/max : 105 / 125 bar
Air / oil consumption : 120cc
Pad width : 110mm
Pad area : 52,500 sqmm
Max allowable wear of brake pad : 5mm
Nominal Co-efficient of friction : ~ 0.35-0.4 µ
Max Air gap : 1.5mm per side
Weight : 85kgs


The Kateel range of hydraulic brakes use a specially formulated hydraulic oil (Hydrol 68) to deliver the desired hydraulic pressure. These hydraulic brakes require a hydraulic power unit to operate the brake. Variable braking torque can be achieved by regulating the hydraulic pressure as shown in the chart.

A hydraulic unit and an electrical controller system will give full control over the braking operation thus enabling smooth stopping of the machine. Over speed setting can also be programmed .The scoop switch option indicates the condition of the brake (On / Off).


  • Automatic wear compensation
  • Easy pad replacement
  • Wide torque range
  • Large pad area
  • Easy mounting


  • Scoop switch
  • Organic / sintered metal brake pads
  • Hydraulic power pack

Application Area

  • Steel Industries.
  • Wind Turbine.
  • Bulk Material Handling equipment.
  • Mines.
  • Special Purpose Machines.
Call Now